FULTS Tooling Dual Strut Nose and Landing Gear Scorpion R/C RC Struts Remote Control Model Aircraft Airplane RF and Scorpion Series Highest Quality in the market place today Hand Made in the USA Cam lock steering arms and interlocking axle hubs


FULTS Standard RF Model Dual Strut Nose Landing Gear page


This model comes in 4 different classes all listed below
Providing a wide variety of applications
SIZING CHART BOTTOM OF THE PAGE



CLASS 1
RF500 ---- RF450 ---- RF400 ---- RF350 ---- RF300
These Dual Struts are the most popular, featuring the cam-lock steering arm. When used below the fuselage, set screw is not required. The large extended pivot shaft gives added strut support and can be used as an engine mount installation.

Select Size & add to Paypal cart




CLASS 2
RF710 ---------------- RF610 ---------------- RF510
These mid-size dual struts are designed for models weighing up to 15 to 25 lbs. The extra large pivot shaft and arched dual struts gives more strength and stability for thoughs rough fields and hard landings. The arched duals also provides the modeler with options of a wider wheel.
Fults Dual Struts have established themselves as the industry standard for after-market enhancements to model aircraft. With the quality that you can only find in handcrafted components, these gears are designed for long life and satisfying performance.

These fine kits are used by Airfoil Aviation, with a custom version ( Scorpion ) going to Dara Aviation. See drawings and chart for details on these super strong dual strut.



Select Size & add to Paypal cart




CLASS 3     ( Like Class 2 except with the adjustable axle hubs )
RF57J (top) ---- RF36J (bottom)
Mid-size adjustable struts feature the interlocking axle hubs. The unique design allows the wheel to be adjusted and locked into position anywhere up and down on the struts.


Select Size & add to Paypal cart






CLASS 4
RF800 (top) ---- RF770 (bottom)
Our 1/4 and 1/3 scale models are of high tensile strength music wire and designed for gas powered engines. Both models feature the adjustable solder axle hubs. The RF800 has the large 5/8" supporting tube.

Select Size & add to Paypal cart


SIZING CHART






Model Class Description (A)
Length 		(A)
Wire
Size 		(B)
Length 		(B)
Wire
Size 		Wheel Size
& (w)width 		Engine
Size
RF 300 CLASS 1
 3" HD
Heavy-Duty
Dual Strut Nose Gear 		3" 1/8" 4" 3/16" up to
2.25" (h)
1"(w) 		.20
to
.40
RF 350 CLASS 1 3 1/2" HD
Heavy-Duty
Dual Strut Nose Gear 		3.5" 1/8" 4" 3/16" up to
2.25" (h)
1"(w) 		.40
RF 400 CLASS 1 4" HD
Heavy-Duty
Dual Strut Nose Gear 		4" 1/8" 4" 3/16" up to
3.5" (h)
1"(w) 		.40
to
.60
RF 450 CLASS 1 4 1/2" HD
Heavy-Duty
Wide Arched Struts
Dual Strut Nose Gear 		4.5" 1/8" 4" 3/16" up to
4" (h)
1 3/8"(w) 		.40
to
.60
RF 500 CLASS 1 5" HD
Heavy-Duty
Dual Strut Nose Gear 		5" 5/32" 4" 3/16" up to
4" (h)
1 3/8"(w) 		.60
to
.90
RF 510 CLASS 2 5" HD
Heavy-Duty
Wide Arched Struts
Dual Strut Nose Gear 		5" 5/32" 4 3/8" 7/32" up to
4" (h)
1 5/8"(w) 		.60
to
1.2
RF 610 CLASS 2 6" HD
Heavy-Duty
Wide Arched Struts
Dual Strut Nose Gear 		6" 5/32" 4 3/8" 7/32" up to
4.5" (h)
1 5/8"(w) 		.60
to
1.2
RF 710 CLASS 2 7" HD
Heavy-Duty
Wide Arched Struts
Dual Strut Nose Gear 		7" 5/32" 4 3/8" 7/32" up to
5" (h)
1 5/8"(w) 		.60
to
1.2
RF 36J CLASS 3 3" - 6"
HD Adjustable
Dual Strut Nose Gear 		3" to 6" 5/32" 4 3/8" 7/32" up to
4.5" (h)
1 3/8"(w) 		.40
to
1.2
RF 57J CLASS 3 5" - 7"
HD Adjustable
Wide Arched Struts
Dual Strut Nose Gear 		5" to 7" 5/32" 4 3/8" 7/32" up to
5" (h)
1 5/8"(w) 		.40
to
1.2
RF 770 CLASS 4 Adjustable 3" - 8 1/2"
1/4 - 1/3 Scale
Dual Strut Nose Gear
with 1/4"
Pivot Shaft 		3" to 8.5" 3/16" 4 1/2" 1/4" up to
6" (h)
1 5/8"(w) 		Gas
Powered
RF 800 CLASS 4 Adjustable 3" - 8 1/2"
1/4 - 1/3 Scale
Dual Strut Nose Gear
with 5/8"
Support Tube 		3" to 8.5" 3/16" 4 1/2" 1/4" up to
6" (h)
1 5/8"(w) 		Gas
Powered






Please feel free to call us for more info.
217-351-3550
Fax 217-351-3590

E-mail us
Sales@FultsLandingGear.com

All Rights Reserved
*** FultsLandingGear.com ® ***
*** Fults Tooling ® ***
2001-2012